a sub-page of: http://www.tc.umn.edu/nlhome/g018/pihlx001/GURPStraveller/

CLICK HERE TO RETURN.

The following is Leif Pihl's attempt to recreate the 50 ton Modular Cutter [TL unknown].
See page 142 of GURPS Traveller book.

THIS DESIGN IS NOT YET COMPLETE! NEED TL INFO!
original posting: 11/15/98, 8:50 pm.

Tonnage	Volume	Size Modifier	Hull Area	Mass TL10/12	Cost (MCr) TL10/12	Spaces
20 (50)	10,000 (25,000)	+7	3,000 (6,500)	3.0(6.5) / 1.5(3.25)	0.36(0.78) [SL]	(20 x 0.8) = 16
Turrets			0	0	0	0
Missile Weaponry (in same)				0	0	0
Armor What is the DR for main unit? It's not listed separate from modules in the book's descriptions.			3,000	(DR100 x {0.00005 / 0.00002} x 3,000)= 15/6	(20 x 0.012)= MCr 0.03	?
Sealing					(3,000 x .00001 =) 0.03 MCr
Bridge, Basic				8.6 / 7.3	4.00 / 3.10	02.5
Engineering				4.1 / 3.7	0.32 / 0.16	01.0
Cargo / Hold				0	0	00.5
Maneuver				(16 x {3.4 / 4.0}) = 54.4/64.0	(16 x {0.16 / 0.29}) = 2.56/4.64	16.0
Jump Drive				0	0	0
Jump Tank				0	0	0
Low Berth				0	0	0
Spacedock				0	0	0
Passenger Couches (capacity = 0)				(0 x 0.54) = 0	(0 x 0.075) = 0	(0 x 1) = 0
Sickbay				0	0	0
Utility				0	0	0
Vehicle Bay (30-ton Ships Boat)				0	0	0
Fuel Processor				0	0	0
SUB-TOTALS				85.1/82.5 unloaded versus 66.086	MCr 7.31/8.75 versus MCr 9.76	20 versus 16
add in:	Cargo			(0.5 x 5 =) 2.5	n.a.
add in:				0	0
TOTALS				87.6/85.0 loaded versus 68.586	MCr 7.31/8.75 versus MCr 9.76
Hit Points {Where are HPs documented?}			xxx (vrs. 3900)
Accel. * Accel. limited w/o module attached.			(___/___) = _._____ G (vrs. 2.0 G*)
Airspeed			sr[(___/___) x 15 mil.]= ___.____ (vrs. 1200*)

 .